Home

Centerior Engineering is a Procon Products authorized distribution center, providing same-day service from our substantial inventory. For special order products or custom requirements, Centerior provides low cost expediting. Our MISSION is satisfying your requirement in the least amount of time - enabling rapid recovery of your investment in labor and equipment!

CENTERIOR ENGINEERING - YOUR 1st RESPONDER, 1st TO SUPPORT
888.566.4741 /  sales@centeriorengineering.com
Service center contacts are available 24-7 including all weekends & holidays.

*****

Centerior Engineering supplies electrical, mechanical & fluid transfer systems,
fractional horsepower motors, pressure control devices & material transports.

We accept Master Card, Visa or will invoice your company.
Our 1st concern is your requirement - paying us waits on your work!

Series 1

1_1

Product Description

PROCON's Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). Clamp-on and bolt-on mounting available.

Series 2

2_1 Product Description
PROCON's Series 2 pumps have the same features as the Series1 except they do not have the integral strainer. Series 1, 2 and 3 are available in 11 flow rates: 15, 25, 35, 50, 60, 70, 80, 100, 110, 125 and 140 gallons per hour at 250 psi. Clamp-on and bolt-on mounting available.

Series 3

3_1

Product Description
PROCON's Series 3 pumps boast all the unique design features of other PROCON pumps. Because the pump body and all the internal metal parts are made from stainless steel, the Series 3 is well suited for pumping a variety of fluids not suitable with brass. Your PROCON factory representative can advise you on the correct pump for the fluids you intend to use. Clamp-on and bolt -on mounting available.

Series 4

4_1Product Description
PROCON's Series 4 is designed and built to meet your needs for flow rates ranging from 115 to 330 gallons per hour at 250 psi. This PROCON pump maintains all the quality features and construction of our Series 1, 2, & 3 pumps. Clamp-on and  bolt -on mounting is also available.

Series 5

5_1Product Description
PROCON's Series 5 is designed and built to meet your needs for flow rates ranging from 115 to 330 gallons per hour at 250 psi. This PROCON pump maintains all the quality features and construction of our Series 1, 2, & 3 pumps. Clamp-on and  bolt -on mounting is also available.

Series 6

6_1Product Description
PROCON's Series 6 is designed and built to meet your needs for higher flows. The flow rate capacity for this pump ranges from 300 to 660 gallons per hour at 250 psi. This series pump is available only in bolt-on style. No integral relief valve is available.

Fractional HP Motors

motorProduct Description
Available in various HP, volts, Hz, clamp-on, carbonator, etc.  Contact us for details.

© Centerior Engineering, Inc. - A Unit of the Northern Allegheny Consortium Website By: RaM Online